Zinc oxide leak, how to deal with it?

2021-07-02

Zinc oxide, a common chemical additive, is frequently used in industrial production. For example, zinc oxide is widely used in the manufacture of plastics, silicate products, synthetic rubber, lubricating oils, paints and coatings, ointments, adhesives, food, batteries, flame retardants, and other products. In fact, zinc oxide is a highly toxic chemical additive, and zinc oxide leakage constitutes a rather serious production accident. So, what should be done in case of a zinc oxide leak?

　　Zinc oxide, a common chemical additive, is frequently used in industrial production. For example, Zinc oxide It is widely used in the production of plastics, silicate products, synthetic rubber, lubricating oil, paints and coatings, ointments, adhesives, food, batteries, flame retardants, etc. In fact, zinc oxide is a highly toxic chemical additive. In industrial production, if zinc oxide is accidentally leaked, it can easily cause poisoning in nearby people. Poisoning victims may experience loss of appetite, dry mouth and throat, fatigue, chest tightness and pain, drowsiness, dry cough, etc.; severe cases may even damage the heart and lung function, endangering the life and health of the poisoned person. Therefore, zinc oxide leakage is a rather serious production accident. So, what should be done in case of zinc oxide leakage?

　　Emergency treatment for zinc oxide leakage is as follows:

　　1. Isolate the zinc oxide leakage contaminated area, set up warning signs around it, and it is recommended that emergency personnel wear masks, goggles, and work clothes. Carefully sweep up, avoiding dust, and bury it in an open area. It can also be washed with a large amount of water, and the diluted wash water is put into the wastewater system. In case of large-scale leakage, collect, recycle or dispose of it harmlessly after treatment.


Zinc oxide


　　2. Skin contact: If you accidentally come into contact with Zinc oxide , immediately wash thoroughly with soap and water, and seek medical attention immediately after the situation stabilizes.

　　3. Zinc oxide eye contact: If zinc oxide accidentally enters the eyes, immediately open the eyelids and rinse with running water for more than 15 minutes, then immediately seek medical attention.

　　4. Inhalation: If zinc oxide is accidentally inhaled, the poisoned person should immediately leave the scene to a fresh air place, and then seek medical attention.

　　5. Ingestion: If zinc oxide is accidentally ingested, drink milk, soy milk or egg white to alleviate toxicity, wash the stomach, and then seek medical attention.

　　6. Transportation precautions: When transporting zinc oxide, ensure that the packaging is intact, avoid violent loading and unloading, and ensure that the container does not leak, collapse, fall, or damage during transportation. It is strictly forbidden to mix and transport with oxidants, and the transportation process should prevent sun exposure, rain, and high temperature.

　　7. Zinc oxide storage matters: Zinc oxide It should be stored in a cool, ventilated warehouse. Keep away from fire and heat sources. It should be stored separately from oxidants, and mixed storage is prohibited. The storage area should be equipped with suitable materials to contain leakage.

关键词:

上一条:

Introduction to Zinc Oxide Production Methods

下一条:

What are the functions of indirect zinc oxide in the rubber industry?