Key points for using indirect zinc oxide?

2022-12-14

With the continuous advancement of science and technology, all walks of life have also developed greatly. The development prospect of indirect zinc oxide is also very good, so the demand is increasing, and there are more and more manufacturers on the market. As a manufacturer, it is also very necessary for us to tell you about the key points of using indirect zinc oxide. Interested partners can come and have a look.

With the continuous advancement of science and technology, all walks of life have also developed greatly. The development prospect of indirect zinc oxide is also very good, so the demand is increasing, and there are more and more manufacturers on the market. As a manufacturer, it is also very necessary for us to tell you about the key points of using indirect zinc oxide. Interested partners can take a look together.

Before using this indirect zinc oxide, many problems have accompanied everyone, so in order to use it better, you need to understand some of its knowledge points. First of all, you should know that indirect zinc oxide is a special material used in motors, electrical appliances, and wires to insulate conductors from each other. Therefore, it not only has the characteristics of general materials, but also has good flexibility, strong adhesion, moderate hardness, high-speed operation resistance, no spraying, low acid value, and no adverse effects on conductors and insulators. If a simple indirect method of zinc oxide is used, it is impossible to meet the above requirements. Usually, according to the different uses of zinc oxide, some characteristics of the product are highlighted. Now this product can also use zinc slag as a raw material. The heavy metal content of different zinc ingots and zinc slag raw materials directly affects the heavy metal impurity content of the product. Although the purity of the produced zinc oxide is different, if zinc oxide produced by the indirect method is used.

Indirect Zinc Oxide

The purity of zinc products is 99.5%--99.7%. The direct method of zinc oxide mainly uses zinc ore, zinc ash, and zinc concentrate as raw materials. After high-temperature oxidation roasting, it is reduced by coal into zinc vapor, and the zinc vapor is oxidized by hot air to obtain zinc oxide. The impurity content of this process product is high, and the purity is low, generally between 75% and 95%. Indirect zinc oxide is just a metal oxide. At room temperature, it is a white hexagonal crystal or powder with a particle size of about 0.1-10 microns. It is insoluble in water, but soluble in acids and strong alkalis, ammonia water, and ammonium salt solutions. This product is odorless, tasteless, and grit-free. It turns yellow when heated and turns white again after cooling. It sublimates when heated to 1800℃. Now this indirect zinc oxide can be used in rubber, varistors, paints, phosphating, films, thermal conductive materials, etc. Products with low heavy metal content can also be used in animal husbandry feed, medicine, and medical industries. The molecular formula and chemical structural formula of zinc oxide is ZnO. As a manufacturer, the products here are sold well all over the country and have been unanimously praised by users.

The above article content tells you about the key points of using indirect zinc oxide, and also shares a better indirect zinc oxide manufacturer in the content. If you have this need, you can check it out, hoping to help you.

关键词:

上一条:

Introduction to the characteristics of indirect zinc oxide method?

下一条:

What are the characteristics of indirect zinc oxide?